The Broker — Business Casual Belt with Brass Buckle 1.3"

Same silhouette. Different character. If you've seen our Merchant belt, the shape here will look familiar — same flat edge, same clean 1.3" profile. The difference is in the buckle, and it changes the whole personality of the belt.

The Broker takes that business-casual shape and finishes it in solid brass instead of steel. Brass ages — it picks up small marks, warms in tone, and slowly looks more like it belongs to you specifically. Underneath, it's the same single 4mm-thick piece of full-grain, vegetable-tanned leather.

If you want a buckle that stays exactly as it left the factory, get the Merchant. If you'd rather it develop some character, this one's for you.

Specs

Material: Full-grain, vegetable-tanned leather (single piece, 4mm thick)
Width: 1.3" (3.3cm)
Buckle: Solid brass, removable (screw-fastened, not riveted)
Edge: Flat-cut, no stitching, clean minimal look
Includes: Punch tool for custom hole adjustment

Why It's Built to Last

Single 4mm-thick piece of full-grain leather — no bonded layers to peel or delaminate
Vegetable-tanned finish develops a deeper patina with wear instead of cracking
Solid brass buckle is screw-fastened, not riveted — replaceable if it ever wears out
Flat-cut edge with no stitching means nothing to fray or unravel
Ships with a punch tool so your fit stays precise for years, not just on day one

Built For

Business casual with a bit more warmth to it — slacks, chinos, and dark denim, the same territory as the Merchant, just with a buckle that's built to show its age gracefully.

Full-Grain Leather vs. Other "Leather" Belts

	Saddlebelt Full-Grain	Other "Leather" Belts
Grain Strength	✓ Single piece, full-grain hide	Bonded scraps, reduced fiber strength
Patina Over Time	✓ Develops a rich patina with wear	Coating cracks or peels instead
Withstands Daily Wear	✓ No peeling, cracking, or delamination	Often fails within months
Buckle	✓ Solid brass, screw-fastened & replaceable	Riveted, can't be replaced if it fails
Price	✓ Costs less over time than replacing a cheap belt every year	Cheap up front, but you'll buy it again and again

Sizing — Please Read Before Ordering

This belt is sold by waist range, not a single fixed length — each size covers a 2-inch span (for example, size 33"-34" fits waists measuring 33 to 34 inches). Every belt ships with a punch tool, so you can trim the tip and add a new hole to fine-tune the fit within your range.

Belt sizing chart: waist size in inches and centimeters converted to belt size

For general belt-sizing help (measuring an existing belt, jeans-size conversion), see our Belt Sizing Guide — note that this product uses the waist-range system above rather than the fixed-length method described there.

How to Adjust Your Belt Length

Each belt comes with a punch tool, so you can easily remove the buckle and adjust the length to fit your waist perfectly.

Step-by-step photos showing how to remove the buckle, trim the belt, punch a new hole, and reattach the buckle

Remove the screw and take off the buckle.
Slide off the tip keeper loop to expose the leather underneath.
Cut off the excess length from the tip end.
Use the punch tool to add a new hole where needed.
Reattach the buckle with the screw and tighten — done.

Care Instructions

Wipe down with a soft, dry cloth after each wear to remove dust and surface oils.
Every 2 to 3 months, work in a small amount of natural leather balm with a clean cloth, let it absorb for a few minutes, then buff off any excess.
If the belt gets wet, blot it dry and let it air-dry away from direct heat — never use a hairdryer or radiator, which can shrink the leather.
The brass buckle will naturally darken and pick up small marks with handling — that's patina, not damage, and it's part of what makes brass brass.

Shipping

Orders are processed within 2–4 business days. Shipping times vary by destination from the date your order ships: